化学蒸气沉积硅氧化合物调变HZSM－5沸石的研究

本文研究了正硅酸乙酯分别在无胺法和有胺法制得的ＨＺＳＭ－５沸石上的沉积过程，并用吸附，ＮＨ３－ＴＰＤ及异丙醇探针反应等手段表征了沉积后的样品，发现沉积仅在外表面上进行，可使孔口变小但不影响孔道内性质，显示有对于二甲苯分子的择形吸附能力，且在甲苯甲醇烷基化反应和二甲苯异构化反应中表现出良好的择形催化性能．     

氟代碳核苷类化合物的合成研究──N－烷基－5－甲酰胺基－1，2，4－氧杂二唑基－3－（4＇－脱氧－4＇－氟－β－L－吡喃型阿拉伯糖）的合成

报道了Ｎ－烷基５－甲酰胺基－１，２，４－氧杂二唑基－３－β－Ｄ－吡喃木糖用二乙胺基三氟化硫选择性氟化，得到相应的Ｎ－烷基－５－甲酰胺基－１，２，４－氧杂二唑基－３－（４＇－脱氧－４＇－氟－β－Ｌ－吡喃型阿拉伯糖）；并用光谱分析确证了它们的构型及在溶液中的构象。     

Carbon nanotube assisted synthesis of CeO2 nanotubes

CeO₂ nanotubes have been synthesized facilely using carbon nanotubes (CNTs) as templates by a liquid phase deposition method. The properties of the CeO₂ nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectrum (XPS) as well as thermogravimetry and differential thermal analysis (TG-DTA). The obtained CeO₂ nanotubes with a polycrystalline face-centered cubic phase have a uniform diameter ranging from 40 to 50 nm. The CeO₂ nanotubes are composed of many tiny interconnected nanocrystallites of about 10 nm in size. The pretreatment of CNTs and calcination temperature were confirmed to be the crucial factors determining the formation of CeO₂ nanotubes. A possible formation mechanism has been suggested to explain the formation of CeO₂ nanotubes.     

烯丙基碘和锡与醛的选择加成反应

含活性基团的醛可与烯丙碘和锡粉直接进行亲核加成反应，得到高烯丙基的醇，水的存在不利于此反应的进行，与烯丙基溴相比，烯丙基碘反应活性更强，可在短时间内得较高的产率。     

Au/CeO2/Y和Au-MFe2O4催化剂用于有氧条件下CH4还原NOx的研究

以CeO2／Y分子筛和MFe2O4(M=Ni,Co，Zn)为载体，制备Au／CeO2／Y和Au-MFe2O4负载型金催化剂．用CH4做还原剂，考察了它们在有氧条件下催化还原NOχ的活性．结果表明：在Au-Y中引人助剂Ce，使得Au／CeO2／Y的催化活性高于Au／Y；Au-CoFe2O4的催化活性高于Au-Fe2O3，反应温度为300℃时，NOχ在Au-CoFe2O4上的转化率达到39．70%．     

邻苯二酚与乙醇单醚化反应用固体酸催化剂表面上的积炭行为

 研究了邻苯二酚与乙醇气固相单醚化反应用固体酸催化剂表面上的积炭行为，并用TG－DTA，BET，GC－MS，FT－IR和元素分析等手段对积炭物种进行了表征．结果表明，催化剂上有两种类型的积炭，一类属可溶性积炭，主要由二苯醚及其衍生物组成，可在低温燃烧除去；另一类属不可溶性积炭，主要为缺氢的芳烃类聚合物或类石墨碳，需在高温下才能烧除．积炭主要发生在4～8nm范围的中孔内，导致反应后的催化剂大孔范围的孔分布所占的分数增大．随着反应的进行，总积炭量逐渐增多．     

Selective alkylation and Suzuki coupling as an efficient strategy for introducing functional anchors to the ethylene-bis(indenyl) ligand

Chiral ansa-ethylene-bis(indenyl)-metal complexes, EBI-MX₂, are useful pre-catalysts for a wide variety of reactions, including hydrogenations, hydrosilylations, and polymerization reactions. In order to immobilize these complexes onto heterogeneous supports, a new methodology was developed to introduce functional anchors to the ethylene-bis(indenyl) ligand, EBI. This was accomplished by selective alkylation of indene to form toluene-4-sulfonic acid 2-(3H-inden-1-yl)-ethyl ester, which was then used to alkylate 6-bromoindene. The selective introduction of an aryl bromide then undergoes coupling reactions with aryl borates via the Suzuki coupling to efficiently introduce an alkenyl or alcohol, functional anchor in a simple four step synthesis.     

Orthogonal PbS nanowire arrays and networks and their Raman scattering behavior

Three-dimensional, orthogonal lead sulfide (PbS) nanowire arrays and networks have been prepared by using a simple, atmospheric pressure chemical vapor deposition (APCVD) method. These uniform nanowires (average diameter 30 nm) grow epitaxially from the surface of the initial PbS crystal seeds and form orthogonal arrays and networks in space. The growth mechanism has been explored, and the process was classified as homogeneous, epitaxial growth in the 200 directions. Furthermore, Raman spectra of PbS nanowires are reported here, and their characteristic Raman peak (190 cm(-1), no shoulder) could be used as a unique probe for the study of PbS nanomaterials.     

Selective cleavage of acetals with ZnBr2 in dichloromethane

A selective cleavage of acetals of 1,2- and 1,3-diols has been achieved under mild conditions using ZnBr₂ in dichloromethane at room temperature. Acetal types cleavable by this procedure include benzylidene, isopropylidene and cyclohexylidene acetals. This method is compatible with several other types of hydroxyl protecting groups such as Bn, Bz, TBDPS, TIPS and TBDMS.